User Manual

54
Channel: Select the channel to edit recording settings.
Copy: Copy record settings to multiple channels.
Default: Revert to factory settings.
Max Pre-Record: Input the amount of time you would like the DVR to pre-record once an alarm has triggered
recording. NOTE: You may choose between 0 and 30 seconds of pre-record. Keep in mind that this is an
approximation.
Save: You must select save once a change has been made. If you do not select save, your changes will revert
to previous settings.
Record Configuration: Click and drag to select the scheduled times of continuous and motion/alarm recording.
Each square represents one hour of time within that day. Red squares indicate the DVR is set to Motion
Record. Yellow squares represent the time in which the DVR will continuously record.
Video Length: Enter the duration of time to record when motion is detected, between 1 and 120 minutes.
When using Continuous Recording, the video length will be the time scheduled.
7.3 Record Menu
From this menu you can enable recording, set video settings and adjust streaming options.
7.3.1 Schedule