User Manual

Set the push notification schedule by following the steps below:

Push Interval: Set the timing between each motion detection push notification. Default parameters are configured

for optimal use. Adjusting the intervals may result in missed notifications.

Select the day you want to configure.

Configure up to four time spans for which you would like to receive push notifications. Checking the

box next to the set time frame will activate the push notification schedule.

Continue editing by selecting different days from the dropdown menu.

Click OK, then select Apply on the menu screen to save your settings.

Write Log: If checked, this menu option will save a log of every motion detection event.

Push: Enable/Disable your DVR to send push notifications to the Night Owl Connect application when motion

detection is triggered.

Record Channel: Enable/Disable your DVR to send push notifications to the Night Owl Connect application

when motion detection is triggered. When motion is detected on the channel being edited, all the cameras

selected under Record Channel would start recording at the same time.

PIR: This option activates Night Owl Smart Detection Technology based on PIR detection. It’s enabled by

default, disable if you would like to use standard motion detection. To have your DVR record motion beyond the

parameters of the PIR technology, you must disable the PIR sensor.