User Manual

51
Motion Detection Enable: When checked, the motion detection feature will be enabled on the selected
channel. By default all channels have motion detection enabled.
Sensitivity: Adjust the level of motion detection. A lower setting will require more movement in the camera
range to begin recording.
Post Record: Set the amount of time to record after motion is detected (between 30 and 300 seconds). This
feature also sets the amount of time the spotlight remains on after detecting motion.
Area: Clicking Set will allow you to configure areas which will and will not detect motion. Red boxes denote areas that
will detect motion and uncolored boxes show areas that will not. When finished, right click to go back to menu.
Channel: Select the channel you want to configure.
Light: Toggle between ON and OFF to enable spotlight on the camera during motion detection.
PIR: Toggle between ON and OFF for passive infrared sensor (PIR) based motion detection.
Human Detection: Toggle between ON and OFF to enable human motion detection on the camera.
Notification Schedule: Set the push notification schedule.
7.2.3 Motion