User Manual
15
Camera
Chapter 4: Camera Installation
Connect a camera to one end of the cable by matching the BNC connectors (yellow) and DC power
connectors (red).
Locate an included 60 foot Video/Power cable.
Audio enabled cameras (not included) will have an additional (white) RCA connection which will
transmit the audio signal and will connect to the audio in port on the back of your DVR.
1
2
3
Repeat for each camera, noting the channel number each camera is plugged into.
4
5
Plug BNC connectors on the other end of the cable into a Video Input port on the back panel of
the DVR.
4.1 Video/Audio
Connect all cameras locally before final placement to ensure that all components function properly.










