User Manual

51Chapter 7: Menus and Settings
12. Repeater: Opens a window which allows for an extended network to be built,
using the cameras as repeaters of the Wi-Fi signal.
13. Arrows: Allows you to move the selected camera to a different channel.
7.2.2 (a) Edit
IPCam Model: Shows the protocol of the camera.
IP Address: Network address of the connected camera.
Subnet Mask: The range of IP addresses that can be found in the network. This
should always be set to the default address 255.255.255.000.
MAC Address: The unique identifier assigned to the network interface of the
camera for communications at the data link layer.
Port: Allows access to your camera with your computer through your LAN or the
Internet. The default value is 80.
Version: Shows the firmware version of the camera.
Username: Shows the username of the credentials needed to establish a
connection with the camera. By default, admin.
Password: Shows the password of the credentials needed to establish a
connection with the camera. By default, password field should be empty.