User Manual
30 WNVR Series User’s Manual
6.1.5 Date and Time Setup
The Date and Time Setup screen of the Startup Wizard will allow you to set the
current date and time. You may choose to use Network Time Protocol (NTP) to
auto-configure the current date and time. To use NTP, check the Enable box next
to Sync Time, then click Sync Now.
NOTE: Selecting Sync Now will temporarily stop recording while syncing NTP.
By clicking the Advance tab on the Sync Time line, you can edit the Sync Time
Server as well as schedule Auto Sync Time to prompt your NVR to automatically
sync NTP.