User Manual

27Chapter 6: Getting Started
will appear. Follow the instructions on this screen to re-test the network. If you
wish to proceed with the NVR setup without a network connection, you may do so by
clicking the box marked, “I do not want to connect to a network.”
NOTE: Without an Internet connection, you will not have easy access to firmware
updates or be able to remotely view your system on a PC/Mac
®
or smart device.
6.1.3 Firmware Check
The Firmware Check screen of the Startup Wizard will automatically check for
updated firmware for your NVR.
NOTE: If your NVR does not have a network connection, the firmware will not update.
When the firmware for your NVR is updated to the most current version, the
Startup Wizard will display the above screen.