Manualshelf

User Manual

ManualsBrandsNight Owl Security ManualsElectronicsNight Owl WNVR201-88P-B 8 Channel 1080p Wireless Smart Security Hub with 8 x 1080p Wireless Infrared IP Cameras and 1 TB HDD, White
21222324252627282930
25Chapter 6: Getting Started
6.1.1 Camera Test
The Camera Test screen of the Startup Wizard serves as a reminder to test the
camera connections to the NVR. If a connected camera displays a “No Signal”
message, please visit www.NightOwlSP.com and click on the Support tab.
NOTE: It may take up to 3 minutes for your wireless cameras to appear on screen.
6.1.2 Network Check
The Network Check screen of the Startup Wizard displays instructions on how to
connect your NVR to the Internet. You will need the included Ethernet cable to
establish a connection. Though the cameras wirelessly connect to the NVR, the
NVR will not be able to wirelessly connect to your router/modem.
Once you have made the required connection using the Ethernet cable, you may
click Test within the Startup Wizard to confirm Internet connection.