Assembly Instruction

Fasten Stretcher Brackets to Arm.
See below for
Preparation of arms
for assembly.
i
Hardware in this box.
2
3
Page 1 of 1
4
Assembly
Instructions
1
One pair of Bifold Arms.
Instructions for Bifold Body assembly, are packed in the Body box.
i
BODY INSTRUCTIONS: Instructions for assembly of
arms to the Bifold Body are in the BODY box.
Assemble the Bifold Body.
Contrary to Assembly Instructions in the BODY box, You will
need to join both the Back Deck and the Seat Deck
together, as shown, before fitting them between the Arms.
SPECIAL NOTE: Back and Seat Assembly.
!
FUTON ARMS
BIFOLD FUTON FRAME
5
Fir Wood Buttons into Arm Holes.
AFTER TOTAL ASSEMBLY:
Push fit or lightly tap
the wooden buttons
into the bolt holes
on the arms.
Key West-0104
Inside ViewOutside View
80mm Bolts x 8 Pieces
For the Front & Back Leg
Stretcher Bracket
x 4 Pieces
Allen Key
x 1 Piece
16mm Bolts
x 4 Pieces
Barrel Nuts
x 8 Pieces
Wooden Dowel
x 4 Pieces
Wood Button
x 8 Pieces
Cleat
Stretcher
Bracket
A.
C.
Insert the Stretcher Bracket Cleat
into the hole provided.
Each arm requires two brackets, front and back.
B. IMPORTANT: Don't fully tighten Bracket until
Stretchers are all in place for easy alignment.
Hole for
cleat
Leg
Dowel
Hole
16mm Bolt
Hole for
bolt
Allen Key
Dowel from
ARM box
Stretcher Rail
from BODY box
Tap dowel all the way into this
hole before assembly to arm.
NOTE: Fitting
Wooden Dowels
Clevis
Pin