Assembly Instruction

ManualsBrandsNight & Day ManualsBedsNight & Day C.King Size

Center Rail

Parts in this Box:

Page 1 of 4

Hardware in this box.

S P I C E S

B E D S A N D C A S E S

Fit the Small Legs to the Center Rail.

Fit Wood Dowels to the

Stretchers:

Tap the Wooden Dowels

all the way into the Middle

holes at the ends of the

Stretchers.

Wooden

Dowels

Middle

Holes

Stretcher

Long Allen Key

x 1

60mm Bolts x 5

30mm Wood Screws x 12

40mm Threaded Wood

Bolts x 12

Wooden Dowels x 8

Barrel Nuts x 10

Patent No.: US 6,457,923

ThumNut™ x 8

80mm Bolts x 5

60mm Bolt

Barrel

Nut

Small Leg

Small Legs x 5

Wooden Feet x 5

Assembly Instructions:

•California King size

Set of Slats x 2

Single Slat x 1

Stretchers x 2

Center Rail x 1

Slats are Packed Seperately in Box 4.

0408

Summary of content (4 pages)

PAGE 1
S P I C E S B E D S A N D Assembly Instructions: C A S E S •California King size 0408 1A Parts in this Box: 1B Slats are Packed Seperately in Box 4. Small Legs x 5 Set of Slats x 2 Wooden Feet x 5 Single Slat x 1 Center Rail x 1 Stretchers x 2 1C Hardware in this box. 80mm Bolts x 5 Barrel Nuts x 10 60mm Bolts x 5 Wooden Dowels x 8 Patent No.: US 6,457,923 30mm Wood Screws x 12 40mm Threaded Wood Bolts x 12 Long Allen Key x1 ThumNut™ x 8 1E Fit the Small Legs to the Center Rail.
PAGE 2
S P I C E S B E D S A N D Assembly Instructions: •California King size C A S E S 0408 2A Attach the Stretchers to the Headboard and Footboard. The Headboard and Footboard are packed in separate Boxes with Bolts and Wood Buttons. Leave the Bolts a bit loose, so it is easier to align the slats. Only after everything is put together should you tighten all the Bolts.
PAGE 3
S P I C E S B E D S A N D C A S E S Assembly Instructions: •California King size 0408 3A Fit one Set of Slats between the Stretchers. Lay one Set of Slats out loosely inside the Stretchers as shown below. Use two of the 40mm Threaded Wood Bolts to fix the end slat in place. Head Board 40mm Threaded Wood Bolt 40mm Threaded Wood Bolt Set of Slats Stretcher Footboard 3B Fit the Center Rail. Position the Center Rail with the Small Legs beneath the Slats.
PAGE 4
S P I C E S B E D S A N D Assembly Instructions: C A S E S •California King size 0408 4A Fit the other Set of Slats between the Stretchers. Lay the other Set of slats out loosely inside the Stretchers at the Footboard end. Fix with 40mm Threaded Wood Bolts. Head Board 40mm Threaded Wood Bolts 40mm Threaded Wood Bolts Slats Stretcher Footboard 4B Fix the Slats in place. Open out the Slats and fix with 40mm Threaded Wood Bolts.