User's Manual

Setup & Operation
Un-pair the shade from Remote control
Hold any Group button, the
shades assigned to the group
will move up and down.
Hold SET for 3 seconds to leave
Setup mode. The Group LEDs will
stop blinking.
The device will leave Setup mode
automatically after 20 seconds of
inactivity.
The shade will move up and
down 2 times to indicate
successful un-pairing. The green
light will stop flashing.
Choose a desired group.
The selected group number
will blink.
Press the button 3 times to
enter Pairing mode. The
green light will start flashing.
Hold SET to enter Setup mode.
The Group LEDs will start
blinking.
捲簾
圖示
捲簾
圖示
捲簾
按鍵