User's Manual
Setup & Operation
Calibration
STEP 1. Press the shade button 8 times to enter Setup mode (green light illuminates).
STEP 2. In Setup mode, press the button 2 times (green light blinks).
STEP 3. The shade will execute calibration.
Note: Please make sure the shade route is clear and do NOT operate the shade during calibration.
Clear All Positions
STEP 1. Press the shade button 8 times to enter Setup mode (green light illuminates).
STEP 2. In Setup mode, press the button 4 times (green light blinks).
STEP 3. The shades will move up and down 2 times to indicate successful clearing.
Note: This action will clear Top/Bottom/ Vane Open positions, My Favorite and all Scene positions.
Clear Pairing Data
STEP 1. Press the shade button 8 times to enter Setup mode (green light illuminates).
STEP 2. In Setup mode, press the button 6 times (green light blinks).
STEP 3. The shades will move up and down 2 times to indicate successfully clearing.
Note: This action will clear all pairing data of the shade.
Hardware Reboot
STEP 1. Hold the shade button for 10 seconds until the red light illuminates.
STEP 2. The shade will reboot.