User's Manual
Setup & Operation
Setup Top Position
Move the shade to a desired
Top position by Remote.
Hold RESET for 1 second. The
Group LEDs will start blinking.
Press OPEN to setup the
Top position.
The shade will move up and
down to indicate successful
setup.
IMPORTANT! Please setup the positions of a single shade to avoid tampering with the positions of other shades
assigned to the same group:
1. Pair the desired shade to any new group alone, then setup the positions via new group, or
2. Power off the other shades in the same group, and setup the positions of the desired shade.
IMPORTANT! Top and Bottom positions must be setup for full function of the shades.
IMPORTANT! Top, Bottom and Vane Open positions must be setup for full function of Perfect Sheer shades.
Choose the desired group.
捲簾
圖示
捲簾
圖示
捲簾
圖示