R130 R130 Replacement of the R181 AVR Installation and maintenance
Electric Power Generation Installation and maintenance 6050 en - 2022.04 / a R130 Replacement of the R181 This manual concerns the alternator AVR which you have just purchased. We wish to draw your attention to the contents of this maintenance manual. SAFETY MEASURES Before using your machine for the first time, it is important to read the whole of this installation and maintenance manual. All necessary operations and interventions on this machine must be performed by a qualified technician.
Electric Power Generation Installation and maintenance 6050 en - 2022.04 / a R130 Replacement of the R181 CONTENTS 1 - GENERAL DESCRIPTION .................................................................................................4 2 - PROCEDURE FOR REPLACING THE R181 ON ARÈS ALTERNATORS .........................5 3 - PROCEDURE FOR REPLACING THE R181 ON ARCM ALTERNATORS ........................6 4 - PROCEDURE FOR REPLACING THE R181 ON ACTR ALTERNATORS .........................
Electric Power Generation Installation and maintenance 6050 en - 2022.04 / a R130 Replacement of the R181 1 - GENERAL DESCRIPTION The R130 is an AVR designed for ARÈS, ARCM or ACTR type compound excitation alternators. The R130 is a transistor-controlled AVR. The measured voltage is filtered and rectified. It is not affected by voltage variations caused by non-linear loads. It is totally sealed with an elastomer which protects it from environmental stresses.
Installation and maintenance Electric Power Generation 6050 en - 2022.04 / a R130 Replacement of the R181 / ARÈS 2 - PROCEDURE FOR REPLACING THE R181 ON ARÈS ALTERNATORS - the “1” terminal (phase W) to terminal 10 of the AVR 1 - Disconnect the wires from the R181 from the connection block. 2 - Remove the R181 and its wired connector. 3 - Put the R130 in position (same fastening).
Electric Power Generation Installation and maintenance 6050 en - 2022.04 / a R130 Replacement of the R181 / ARCM 3 - PROCEDURE FOR REPLACING THE R181 ON ARCM ALTERNATORS - the “1” terminal (phase T2) to terminal of the AVR 1 - Disconnect the wires from the R181 from the connection block. 2 - Remove the R181 and its wired connector. 3 - Put the R130 in position (same fastening).
Electric Power Generation Installation and maintenance 6050 en - 2022.04 / a R130 Replacement of the R181 / ACTR 4 - PROCEDURE FOR REPLACING THE R181 ON ACTR ALTERNATORS - the “1” terminal (phase W) to terminal 10 of the AVR 1 - Disconnect the wires from the R181 from the connection block. 2 - Remove the R181 and its wired connector. 3 - Put the R130 in position (same fastening).
Electric Power Generation Installation and maintenance R130 Replacement of the R181 8 6050 en - 2022.
Electric Power Generation Installation and maintenance 6050 en - 2022.
Electric Power Generation Installation and maintenance 6050 en - 2022.04 / a R130 Replacement of the R181 Disposal and recycling instructions We are committed limiting the environmental impact of our activity. We continuously monitor our production processes, material sourcing and products design to improve recyclability and minimise our environmental footprint. These instructions are for information purposes only.
Service & Support Our worldwide service network of over 80 facilities is at your service. This local presence is our guarantee for fast and efficient repair, support and maintenance services. Trust your alternator maintenance and support to electric power generation experts. Our field personnel are 100% qualified and fully trained to operate in all environments and on all machine types. We have a deep understanding of alternator operation, providing the best value service to optimise your cost of ownership.
www.emersonindustrial.com www.leroy-somer.com/epg Linkedin.com/company/leroy-somer Twitter.com/Leroy_Somer_en Facebook.com/LeroySomer.Nidec.en YouTube.com/LeroySomerOfficiel 6050 en - 2022.
