Commissioning guide with Powerdrive F300 / Pump drive F600 Motors 11 to 200 kW interchangeable version 1500 and 3000 series with drive Reference: 6068 en - 2022.
INTRODUCTION 1 - INTRODUCTION Before setting the drive, please follow the safety and installation instructions for Dyneo+ motors and Powerdrive F300 / Pump drive F600 drives described in their respective manual. Dyneo+ motors: http://www.leroy-somer.com/documentation_pdf/5411_en.pdf Powerdrive F300 / Pump drive F600 drive: see the Getting started guide and associated Power Installation guide (available from the Control Techniques website).
COMMISSIONING WITH POWERDRIVE F300 / PUMP DRIVE F600 2 - COMMISSIONING WITH POWERDRIVE F300 / PUMP DRIVE F600 RFC-S mode for interchangeable Dyneo+ permanent magnet motors without position feedback (Sensorless) Description Action Before power-up Advanced menu access from the keypad Ensure: • The drive enable signal is not given (terminal 29) • The Run signal is not given • Motor is connected To access all menus required for commissioning, set Pr 00.049 = All menus (1) on Powerdrive F300 and Pr 00.
COMMISSIONING WITH POWERDRIVE F300 / PUMP DRIVE F600 Action Description Additional settings Set: • Current Reference Filter 1 Time Constant Pr 04.012 = 2 ms • Thermal Protection Mode Pr 04.016 = Disabled (4) • Maximum Switching Frequency Pr 05.018 = 3kH (1) • Flux Control Gain Pr 05.027 = 0.1 • Minimum Switching Frequency Pr 05.038 = 3kH (1) • Voltage Headroom Pr 05.041 = 5%. [Do not set a lower value. Increase this value to 10%, if the motor is unstable in the field weakening area].
APPENDIX F300 / PUMP DRIVE F600 COMMISSIONING WITH POWERDRIVE Range 1500 rpm PARAMETERS MOTOR type LSHRM 160 MR1 LSHRM 160 LR1 LSHRM 180 M1 LSHRM 180 L1 LSHRM 200 LQ1 LSHRM 225 SZ1 LSHRM 225 MG LSHRM 250 ME LSHRM 280 SD LSHRM 280 MD LSHRM 315 SN1 LSHRM 315 MP LSHRM 315 MP LSHRM 315 MR FLSHRM 280 SB FLSHRM 280 MD FLSHRM 315 STB FLSHRM 315 M FLSHRM 315 LA FLSHRM 315 LB kW Coupling Drive Hz Speed Speed Current Current Thermal Rated Rated Rated Stator Trip Lq @0A Ld BEMF Gain Constant C
APPENDIX F300 / PUMP DRIVE F600 COMMISSIONING WITH POWERDRIVE Range 3000 rpm PARAMETERS MOTOR type LSHRM 160 MR1 LSHRM 160 MR1 LSHRM 160 LR1 LSHRM 180 M1 LSHRM 200 LQ1 LSHRM 200 LQ1 LSHRM 225 MY1 LSHRM 250 ME LSHRM 280 SC LSHRM 280 MC LSHRM 315 SN1 LSHRM 315 MN1 LSHRM 315 MN1 LSHRM 315 MN1 FLSHRM 280 SA FLSHRM 280 MA FLSHRM 315 STA FLSHRM 315 MT FLSHRM 315 LTA FLSHRM 315 LTB 6 kW Coupling Drive Hz Stator Trip Speed Speed Current Current Thermal Rated Rated Rated Lq @0A Ld BEMF Gain
Moteurs Leroy-Somer Headquarter: Boulevard Marcellin Leroy - CS 10015 16915 ANGOULÊME Cedex 9 Limited company with capital of 38,679,664 € RCS Angoulême 338 567 258 www.leroy-somer.
