User's Manual

No ASR – NP – 26819 – 01
10
CONFIDENTIAL
10-6 Indicator lamp
POWER: Green Lamp
On: Power ON
Off: Power OFF
READY: Green Lamp
On: Device is ready to communicate.
Off: Device is not ready to communicate.
Blinks: Program downloads state.
ERROR: Red Lamp
On: Error has occurred.
Off Error has not occurred. Or it was cleared.
10-7 Sound noise
Operating: Within 65 dB
It is measured at a position 1m away from the device.
Measurement mode is A Lange FAST mode. (Refer to JIS-Z8731)
10-8 SG-FG connection state
SG and FG are connected at inside of this device.
10-9 Safety
Scanner unit: not certified yet
AC adapter of scanner unit: SPU61A-108-NDS/AC UL/cUL
11. Environmental condition
11-1 Installation environment
Place: Lobby
The ID card reader device is intended for use stand-alone
installed “in lobby or office”.
Recommendation:
This means that the device is not exposed to outside weather conditions and
dusty environmental. Particularly the silica in the dust will damage the glass of
image sensor and will shorten the life of the devices.
B