User's Manual

No ASR – NP – 26819 – 01
8
CONFIDENTIAL
9-6 Distortional cards
Refer to the figure below.
It is possible to use it up to the amount of the height of "H" with the card that
uniformly curves in longer direction and direction of shorter hand.
1) Transfer: “H” within 3mm (containing emboss)
2) Imaging: “H” within 2.5mm (containing emboss) at 25 degrees C.
“H” within 2.0mm at operating condition.
3) MSR: “H” less than 2.5mm (containing emboss) at 25 degrees C.
“H” within 2.0mm at operating condition.
Note) Please do not use the card like the figures below.
Note) unavailable medium
Receipt sheet, business card, Medium with clip adheres, Medium with stapler
adhered, etc.
H
H
Bending of both direction in inside and outside
Bent card
Cracked, holey card
Defective card
Non-standard size
B