Specification Type Name : ISI221-0131 Spec. No. ASR-NP-26819-01 No. of sheet Custody Distribution Notes : B Sym. ISI221-0131 Type Name Change AC adapter Revision Design T.Tokunaga Nov.28.2015 Det-che M.Ikeda Nov.28 2015 Appro. T.Tatai Dec.01 2015 ・ ・ ・ ・ ・ ・ ・ ・ See front page EB-21104-01 Dec.11.2015 T.Tokunaga T.Tatai Page Cha. No. Date By Appr. Reference Document T13A753A01: Outside Drawing ASL-NP-26819-52, ASL-NP-26819-54: Driver spec.
CONFIDENTIAL No ASR – NP – 26819 – 01 i Table of contents 1. Product name ............................................................................................................... 1 2. Product number............................................................................................................ 1 3. Overview ...................................................................................................................... 1 4. Related standards ................................
CONFIDENTIAL No ASR – NP – 26819 – 01 11. Environmental condition ........................................................................................... 10 11-1 Installation environment ...................................................................................... 10 11-2 Operating condition ............................................................................................. 11 11-3 Transport condition ...........................................................................
CONFIDENTIAL No ASR – NP – 26819 – 01 Revision History Rev Date Author A 2015-11-28 T.Tokunaga Description New B 2015-12-10 T.
CONFIDENTIAL No ASR – NP – 26819 – 01 1 /24 1. Product name ID card reader 2. Product number ISI221-0131 3. Overview This device is an ID card reader for ID1 size card that is defined by ISO/IEC 7810. This device can be also used as a scanner that captures images of both sides on the card. As an optional feature, it is possible to use a USB device server sold separately, it communicates with the host system by ETHERNET.
No CONFIDENTIAL ASR – NP – 26819 – 01 2 5. Constituents 5-1 Design structure Windows host Scanner unit USB PC +24Vdc AC Adapter Figure 5-1 Configuration diagram Block diagram of product See Figure B-1 in APPENDIX B 5-1-1 Attached article AC adapter of scanner unit B Parts number: E11A879A01 Vender name: SINPRO ELECTRONICS CO., LTD. Model number: SPU61A-108-NDS/AC Output: 24V 2.5A 5-2 Usage of ultraviolet LED This product uses the UV LED to the lighting of the image sensor.
CONFIDENTIAL No ASR – NP – 26819 – 01 3 6-1-3 Image format BMP image format 6-1-4 Image data size Full color image both side: 17.47Mbyte (600dpi only) IR image both side: 5.82Mbyte (600dpi), 1.46MByte (300dpi) UV image both side: 5.82Mbyte (600dpi), 1.
CONFIDENTIAL No ASR – NP – 26819 – 01 4 6-2 Contactless IC card communication: RFID RFID read and write function is based on Type A, Type B communication method in ISO/IEC 14443. 6-3 Magnetic stripe reading: MSR 6-3-1 General description about MSR Suitable card for this scanner is compliant with ISO/IEC 7810, 7811-2,-6 (JISX6301, 6302-2,-6) and AAMVA specification. The reading process of magnetic stripe is occurring at same time when the card is loading.
No CONFIDENTIAL ASR – NP – 26819 – 01 6-5 Transaction counter Transaction counter is supported. It counts up only when scan transaction succeeded. When an error occurred in scan transaction, it does not count up. Recorded count is reset at the factory. 6-6 Transaction time : informative Transaction time under the following condition is approximately 6 seconds. Sequence : Loading card -> Front and back face scanning -> Transfer data(under USB 2.
No CONFIDENTIAL ASR – NP – 26819 – 01 7. Interface 7-1 Scanner interface Interface: USB2.0 High Speed / Mating Connector: USB-Type A This device is Vendor-Specific Class device. It is constituted by three end points, Bulk IN, Bulk OUT, and interrupt IN. 7-2 Scanner USB descriptor This device does not receive USB Logo. However, it is a level which can pass a compliance program.
CONFIDENTIAL No ASR – NP – 26819 – 8. Support software and documents 8-1 Utility and software Scanner driver and installer (refer to Scanner driver specification) Hardware control utility (refer to Maintenance manual) 8-2 Documents Scanner driver specification : ASL-NP-26819-52 Maintenance manual : AMR-NP-26819-01 9. Intended cards 9-1 Card length 85.47~85.9mm 9-2 Card width 53.92~54.18mm 9-3 Thickness of card that can be transported Transportable condition of card: 0.25~0.84mm Within 1.
No CONFIDENTIAL ASR – NP – 26819 – 01 8 9-6 Distortional cards Refer to the figure below. It is possible to use it up to the amount of the height of "H" with the card that uniformly curves in longer direction and direction of shorter hand. 1) Transfer: “H” within 3mm (containing emboss) 2) Imaging: “H” within 2.5mm (containing emboss) at 25 degrees C. B “H” within 2.0mm at operating condition. 3) MSR: “H” less than 2.5mm (containing emboss) at 25 degrees C. “H” within 2.
No CONFIDENTIAL ASR – NP – 26819 – 01 10. Common specifications 10-1 Dimension Scanner unit: 122(W) x 113(H) x 260(D) [mm] See Outside drawing: T13A753A01 10-2 Mass Machine body: approx. 2.4kg B AC adapter: approx. 250g (E11A879A01) B AC cord set: approx. 170g 10-3 Power source 10-3-1 Power supply B AC adapter of scanner unit: Input: AC100V-240V_50/60Hz_1.45A Please do not insert and pull out the DC jack during operation.
No CONFIDENTIAL ASR – NP – 26819 – 01 10 10-6 Indicator lamp POWER: Green Lamp On: Power ON Off: Power OFF READY: Green Lamp On: Device is ready to communicate. Off: Device is not ready to communicate. Blinks: Program downloads state. ERROR: Red Lamp On: Error has occurred. Off Error has not occurred. Or it was cleared. 10-7 Sound noise Operating: Within 65 dB It is measured at a position 1m away from the device. Measurement mode is A Lange FAST mode.
CONFIDENTIAL No ASR – NP – 26819 – 01 11 11-2 Operating condition Operating: +0 degrees C ~ 40 degrees C 30%~85% R.H no condensation Maximum wet bulb is +30 degrees C No warped card when temperature is between 0~+5 degrees C. Non-operating (power off): -10 degrees C~ 60 degrees C 20%~85% R.H No condensation Maximum wet bulb is +35 degrees C 11-3 Transport condition Packed: -10 degrees C ~ 60 degrees C 10%~90% R.
No CONFIDENTIAL ASR – NP – 26819 – 01 12 11-5 Mechanical shock test Without packing: Test method: Fixing at the end and drop down at another end Lift up angle: 30 degrees Lift up edge: Every 4 side Number of time: 2 times per one side Table situation: On the wood table This test is done under non-operating. With packing: Test method: Free fall Lift up height: 600 mm Falling direction: 1 corner, 3 ridges and 6 faces Total falling times: 10 times There is no degradation.
No CONFIDENTIAL ASR – NP – 26819 – 01 13 11-9-2 Contact discharge (without cover case) Immunity level: +/- 8kV by 150pF / 330 ohms It discharges 25 times per every electrical polarity (+/-) to the gate in the front face, the knob of the top cover, and the card transportation knob. This test is done while non-operating (power off). The device should operate normally after powered on.
No CONFIDENTIAL ASR – NP – 26819 – 01 14 12. Image quality 12-1 MTF at full color mode Minimum 35%, typical 70% MTF means ratio between 0.5line pare and 3.0 line pare 12-2 Magnification of image Main scanning direction: Within +/- 3.2% Vertical scanning direction: Within +/- 3.2% 12-3 Image skew +/- 1.5 degrees see figure 3-1 at Normal flat card 12-4 Target value of white level The target value is 229 when the white reference card is read. The white reference card is “S38A497A01”.
No CONFIDENTIAL ASR – NP – 26819 – 01 15 13. Reliability 13-1 Product life 500,000 transactions or 7 years Recommended replacement cycle of rubber roller is 200,000 transactions. Note) Since reliability of rubber parts are greatly influenced by the ambient temperature, humidity and environment, the replacement timing of the rubber roller may become earlier than the above-mentioned value. One transaction contains follows.
CONFIDENTIAL No ASR – NP – 26819 – 01 16 14. Product Warranty 14-1 Warranty period: One year from delivery If there are any problems or it becomes malfunctioning within one year after it passes delivery incoming inspection, it should be repaired or replaced in warranty free of charge. 14-2 Repair and maintenance After the above warranty period, any repair or replacement should be made as out of warranty and be charged.
No CONFIDENTIAL ASR – NP – 26819 – 01 16. Optional feature (USB device server) As an optional feature, it is possible to use a USB device server (sold separately), it communicates with the host system by ETHERNET. 16-1 Design structure (communicating with the host system by ETHERNET) Windows host PC ETHERNET USB device server USB2.0 Scanner unit +5.
No CONFIDENTIAL ASR – NP – 26819 – 01 18 16-4 Correspond to THIN CLIENT model Linking Model: Thin Client Model The scanner driver controls several scanners by single process.
No CONFIDENTIAL ASR – NP – 26819 – 01 19 16-5 Exclusive device control Many DS(s) are connectable with one PC through a network. If it considers that this connection is one group, many groups can be existed on the same network. By the mutual authentication of SSL, the connection with DS of another combination is prevented. (e.g. Not connectable with DS of Shop-B from the PC of the Shop-A. [Refer to the following figure.]) ShopShop-A HUB PC DS ISI221 ShopShop-B HUB PC DS ISI221 Fig.
CONFIDENTIAL No ASR – NP – 26819 – 01 20 16-6 EHERNET Host interface Transmission Method: ETHERNET * Converted by USB Device Server UDP/IP original protocol and TCP/IP protocol mixed Device server control: UDP/IP USB transaction data: TCP/IP and UDP/IP mixed Security: Public key exchange as like as SSL for symmetric-key Data encryption is AES256 16-7 Base on SSL security design After exchanging symmetric keys by SSL (TLS1.0), TCP/IP connection is started.
No CONFIDENTIAL ASR Appendix A Normal condition Temperature: +20 +/- 5 degrees C Humidity: 35 % ~ 60% R.
No CONFIDENTIAL ASR – NP – 26819 – 01 22 Appendix B Read head Motor driver Motor Analog front end Back side CIS + LED light Face side CIS + LED light Card position sensor LED + Photo Tr EEPROM Sub-CPU Motor control Serial communication OSC RF antenna FROM DDR MPU Shading and gamma Compensation Pixel conversion Reading of the Mag. ＋ RF circuit Windows host PC USB I/F Timing generator AC adapter DC24V Figure B-1.
No CONFIDENTIAL ASR – NP 26819 – 01 1 (53.92~54.18) 1 1 – 1 Imaging area B (85.47~85.9) Figure B-2. Imaging area B: 50.8mm (1200pixel) Skew = A * tan (A/B): B dimension is 50.8mm (1200pixels) Reading direction Medium face A Figure 3-1 Image skew D C:81.28mm (1920pixel) Reading direction D =< 8pixel Medium face Figure 3-2 Image deformation Figure3.
CONFIDENTIAL No ASR – NP – 26819 – 01 NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Ｒ-５１１０００１ Ｒ-５１１０００１
