User's Manual

No ASR – NP – 20847 – 01
4
5-6.Intended cards
5-6-1. Card length
85.47~85.9mm
5-6-2. Card width
53.92~54.18mm
5-6-3. Thickness of card that can be transported
0.25~0.84mm
(Within 1.32 mm when the height of emboss is contained.
The emboss area is specified by ISO/IEC 7811-1)
5-6-4. Thickness of card that can be read the magnetic stripe and images
0.5~0.84mm
(Within 1.32 mm when the height of emboss is contained.
The emboss area is specified by ISO/IEC 7811-1)
5-6-5. Material
PVC, PVAC, PET-G
5-6-6. Opacity
More than 1.1 at Infrared wave length 700~950 nm
5-6-7. Distortional cards
Refer to the figure below.
It is possible to use it up to the amount of the height of "H" with the card
that uniformly curves in longer direction and direction of shorter hand.
1) Transfer: “H” within 3mm (containing emboss)
2) Imaging: “H” within 2.5mm (containing emboss)
3) MSR: “H” less than 2.5mm (containing emboss)
H
H
Bending of both direction in inside and outside