User Manual

CONFIDENTIAL No ASR – NP – 14836 – 01 3/
1. Product
Contactless IC card dispenser
2. Model
SCT0M0-0130
This product is compliant to "RoHS" Instruction.
3. General Description
The unit (hereinafter called as SCT) issues Contactless IC cards under the control of user's HOST.
SCT receives a card from Hopper unit, then writes a HOST data on the card and verifies the written data.
SCT controls an interface between the HOST computer and a Contactless IC chip in the card.
After these functions, SCT sends the card from a front gate. Also, SCT is able to take the card into the
unit again.
4. Configuration
SCT is configured per the following block diagram.
4.1 RS232C Interface
RS232C Interface circuit administrates a data transfer between a HOST computer and a SCT Unit.
Interface specifications: ASL-NP-14836-01
4.2 Internal Control
Internal control administrates movement control, data transaction and information transaction
with an outside device.
Contactless IC card R/W
Card Hopper
Reject Stacker
Internal Control
Card Motion
Power Supply
+24V
HOST
GATE