Instructions / Assembly

ManualsBrandsNICOR ManualsDoorbell KitsPrimeChime Plus 2 Video Compatible Wired Door Bell Chime Kit with Nickel Decorative Button

NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393 www.nicorlighting.com June 30, 2023 5:00 PM PRCP2 Rev - Page 3 of 5

Prime Chime Plus - INSTALLATION INSTRUCTIONS Model: PRCP2

For daisy chain: Run bell wire (18-22ga) from

the matching ports of the second unit. e.g

1(+) to 1(+), 2(-) to 2(-), etc. If only one button

is installed only ports 1 and 2 of the DAISY

CHAIN need to be used.

See below for basic diagram of multiple chime wiring.

Connect line voltage wiring (120VAC, 18ga or greater)

per the diagram.

Junction

Box

Black (Line)

White (Neutral)

120V/60Hz only

Connect low voltage bell wires (18ga-22ga) from the included

buttons (or compatible vido doobell) into “FRONT” ports 1(+)

and 2(-) for front door and “REAR” 3(+) and 4(-) for rear door.

Front Rear

Front

Rear

Front

Rear

Front Rear