Specification

12.75 in
(324 mm)
12.875 in
(327 mm)
7.75 in
(197 mm)
10.75 in
(273 mm)
3 in
(76.2 mm)
1.625 in
(41.2 mm)
NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393
www.nicorlighting.com April 5, 2021 11:11 AM EXL2 Page 1 of 1
Ordering Information (EM ONLY)
Series Version/Voltage Housing Finish Backing Material Letter Color Number of Sides
EXL2 10UNV (Version 1/ 120-
277VAC)
AL (Aluminum) CL (Clear - single only) G (Green) 1 (Single)
MR (Mirrored - double only) R (Red) 2 (Double)
Example: EXL2-10UNV-AL-CL-G-1
EXL2
LED Edge Lit Exit Sign
PRODUCT INFORMATION
Input Voltage (VAC):
120/277
Power Draw (W):
2.3
Emergency Operation (EM ONLY): 90 minutes
Type
Date
Catalog
Project
Product Description
The EXL2 LED Edge Lit Exit Series presents a contemporary design with ease of
installation and dependability in mind. It is constructed of impact-resistant, optically
clear acrylic, with clear single-faced or mirrored double-faced panels. High output LEDs
deliver an indirect, evenly illuminated edge-lit exit sign with exceptional light distribution
and an optional, maintenance-free nickel-cadmium battery for long life. The EXL2 Series
oers exible installation for surface ceiling, wall or end mount options along with eld
adjustable chevrons for universal conguration based on your application’s directional
needs.
Construction
• Specication grade aluminum extrusion design
• Optically clear, impact resistant acrylic panels with lettering
• Single or double faced congurations available
Electrical
• LED light engine provides consistently bright, even EXIT legend illumination with red or green LEDs
• 120/277VAC Dual Voltage Operation, 60Hz input
• Fully-illuminated 6” letter height with 3/4” stroke
• Damp Location Rated 0˚C - 40˚C (32˚F - 104˚F)
Electrical (EM ONLY)
• Maintenance-free NiCad battery provides 90-minute emergency operation
• Low voltage disconnect eliminates deep discharge
• Brown-out, short circuit and voltage surge protection
• LED Indicator Light & Self-Test Push Button Switch
• UL Listed to Standard 924 (Emergency Lighting)
• NFPA 101 (Life Safety Code) compliant
• NFPA 70 (National Electrical Code) compliant
Finish
• Satin nished aluminum housing
• Available with either clear (single faced) or mirrored backing (double face)
• Available with either green or red lettering
Installation
• No special tools required
• Mounting plate allows for surface ceiling, wall or end mount options
• Field-installable, removable chevron directional indicators for all congurations
• Chevron mounting template simplies directional application
• For installations where power surge may be possible, NICOR recommends installing additional
surge protection at the electrical distribution panel
Warranty
• 1-year limited system warranty standard
• Warranty does not cover product failure due to an overvoltage event (power surge)
Specications and dimensions subject to change without notice
Ordering Information (AC ONLY)
Series Version/Voltage Housing Finish Backing Material Letter Color Number of Sides
EXL2 10UNVAC (Version 1/ 120-
277V, AC ONLY)
AL (Aluminum) CL (Clear - single only) G (Green) 1 (Single)
MR (Mirrored - double only) R (Red) 2 (Double)
Example: EXL210UNVACALMRR2
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
1Y
1YEAR
WARRANTY