Product Brochure

13in
(338mm)
12.2in
(310mm)
24in
(610mm)
24in
(610mm)
2.25in
(57mm)
1.5in
(38mm)
To FixtureTo Test Switch
The EMB80 is rated for
damp location and UL
listed for eld installations.
The EMB series can be
used with switched or
unswitched xtures.
Ordering Information
Series Version Voltage
EMB80 10 (Version 1) UNV (120/277VAC)
Specications and dimensions subject to change without notice
Applications
Installation
The EMB80 is an LED emergency driver for factory or
eld installations that enables normal and emergency
operation of a LED xture. During a power failure, the
EMB80 activates emergency mode to maintain 8.5
watts of output power to the xture for a minimum
90 minute capacity on emergency mode without light
degradation. The EMB80 contains a battery, charger,
and converter circuit in a single housing.
Construction
• Heavy duty steel case
• Red powder coat nish
• 24” exible conduit leads
Electrical
• Long life high temperature Ni-Cad battery
• Single piece test switch/charge indicator included
• Constant power design provides consistent
lumen output for minimum 90 minute
capacity on emergency mode
• Self sensing output voltage adjusts for various
products such as troers, downlights, strips, etc.
• 24 hour recharge time
Installation
• For use with switched or unswitched xtures
• Rated for plenum, damp location,
and type IC luminaires
• UL Listed for factory and eld installation
Listings
• Meets FCC Part 15B Class A requirements
Warranty
• 5-year limited system warranty standard
EMB80 NICOR Emergency Driver 8.5W
The EMB series can be installed in panels, troers, high bays and more.
Product Information
Input Voltage (VAC) 120/277 50/60 Hz
Input Power 5.5W
Output Voltage 3-60 VDC
Output Power 8.5W (Constant)
Emergency Operation Minimum 90 Minutes
Operating Temp 32°F to 122°F (0°C-50° C)
Weight 3.1 lbs
5 YEAR
WARRANTY