Product Brochure
The EMB45 is rated for
damp location and UL
listed for eld installations.
The EMB series can be used with
switched or unswitched xtures.
Ordering Information
Series Version Voltage
EMB45 10 (Version 1) UNV (120/277VAC)
Specications and dimensions subject to change without notice
Applications
Installation
The EMB45 is an LED emergency driver for factory or
eld installation that enables normal and emergency
operation of a switched or non-switched LED
xture. During a power failure, the EMB45 activates
emergency mode to maintain output wattage to the
xture without light degradation for a minimum 90
minute capacity on emergency mode. The EMB45
contains a battery, charger, and converter circuit in a
single housing.
Construction
• Heavy duty steel case
• Red powder coat nish
• 24” exible conduit leads
Electrical
• Long life high temperature Ni-Cad battery
• Single piece test switch/charge indicator included
• Constant power design provides consistent
lumen output for minimum 90 minute
capacity on emergency mode
• Self sensing output voltage adjusts for various
products such as troers, downlights, strips, etc.
• 24 hour recharge time
Installation
• For use with switched or unswitched xtures
• Rated for plenum, damp location,
and type IC luminaires
• UL Listed for factory and eld installation
Listings
• Meets FCC Part 15B Class A requirements
Warranty
• 5-year limited system warranty standard
EMB45 NICOR Emergency Driver 4.5W
The EMB series can be installed in panels, troers, high bays and more.
Product Information
Input Voltage (VAC) 120/277 50/60 Hz
Input Power 5.0W
Output Voltage 3-60 VDC
Output Power 4.5W (Constant)
Emergency Operation Minimum 90 Minutes
Operating Temp 32°F to 122°F (0°C-50° C)
Weight 2.4 lbs
5 YEAR
WARRANTY
11in
(279mm)
10in
(254mm)
24in
(610mm)
24in
(610mm)
2.25in
(57mm)
1.5in
(38mm)
To FixtureTo Test Switch