Specifications

14 1/4”
10 1/4”
8 1/2”
6”
10 1/4”
4 1/4”
19002A 4” Incandescent Line Voltage Airtight Housing
DESCRIPTION
Suitable for new construction in residential and commercial applications.
IC rated. Suitable for direct contact with insulation.
HOUSING
Aluminum construction provides greater heat dissipation.
Washington State Energy Code approved to meet restricted airow
requirements.
Airtight housing limits the exchange of air between ceiling plenum and heated/
cooled areas.
Integral thermal protector guards against improper lamping and misuse of
insulation materials.
Adjustable socket bracket assures proper and consistent lamp positioning.
6” height allows use in 2” x 8” joist construction.
PLASTER FRAME
Housing is secured to plaster frame with screws and can be removed for access
to junction box.
Housing adjusts from 1/2” to 1 1/2” to accommodate ceiling thickness.
JUNCTION BOX
Listed for through branch circuit wiring and includes several 3/4” knockouts. Four
pry-outs with integral strain relief simplify Romex installation.
Supplied with three IDEAL® push-in wire connectors.
HANGER BARS
Heavy-gauge NICOR captive hanger bars provide greater stability, allowing housing to be positioned at any point within
a 24” joist span, then locked in place with set screws. Unique hanger bar lip design helps align can to joist. Four double-
headed captive nails provide for ease of installation.
Bars can be repositioned 90° on plaster frame without tools.
Bars t onto T-bar spine for quick alignment and can be permanently secured.
Score lines allow bars to be shortened without tools to accommodate a 12” joist span.
LISTINGS
UL listed for direct contact with insulation
UL damp location
UL feed-through
CUL.
Project Comments
Catalog #
Prepared By
Type Date
© 2010 NICOR, Inc. www.nicorlighting.com Specications subject to change without notice. Rev-02/12 1/4
TITLE 24 COMPLIANT
Print
Reset