Instructions / Assembly

Find your niche

VERSATILE AND MODERN

MIA RECLINING CHAIR 2000

ASSEMBLY INSTRUCTIONS

STEP 1

STEP 2

Aach Back Frame (C) to Seat Frame (D) using Small Bolts (F)

and Allen Wrench (H) .

Aach Assembled Seat to Standing Frame with Large Bolts (E).

Insert from outside of Frame (A) and into Seat using Allen

Wrench (H).

Aer seat and frame are aached, ghten down all bolts using

Allen Wrench (H).

STEP 3

Place the assembled seat frame down with the curved side of

the headrest facing up. Slide Fabric Cover (I) over the frame so

the zipper of the Fabric Cover (I) is on the back side of the frame.

Aach Stringers (B) to Wood Frames (A). Remove Inserts from Large Bolts (G) and place Inserts into pre-drilled holes on Stringers (B)

(See Figure 1.)

Insert Large bolts (G) from outside of Wood Frames (A) and connect to Inserts using Allen Wrench (H). Please Note: Do not

completely ghten bolts yet.

Figure 1