User's Manual

16
NAMES AND
FUNCTIONS
BASIC
OPERATIONS
ADVANCED
OPERATIONS
TROUBLESHOOTING
OTHERS
ENGLISH
ADVANCED
OPERATIONS
INSTALLATION PROCEDURES FOR THE BASE UNIT
1.
Remove the handset from the base unit.
2.
Push the handset holder from through the hole on the bottom of the base unit.
Handset holder
3.
Move the stopper at the rear of the handset holder backward until it clicks and locks.
COMPOSITE
COMPONENT
S-VIDEO
Handset holder
4.
Connect the cables.
5.
Secure the base unit on the wall, by tightening the screws of the size shown in the fi gure below,
using a screwdriver, through the holes for wall mounting of the base unit.
Holes for wall mounting
XX mm (XX ins.)
XX mm (XX ins.)
XX mm (XX ins.)
Notes
• Check that the unit is securely fi xed on the wall.
• Securely connect the cables to the unit.
• To detach the unit from the wall and use it on a table, return the stopper to its original position, by holding the
release button pressed, then return the handset holder to its original position.
ADVANCED OPERATIONS