User's Manual

13
NAMES AND
FUNCTIONS
ENGLISH
BASIC
OPERATIONS
ADVANCED
OPERATIONS
TROUBLESHOOTING
OTHERS
BASIC
OPERATIONS
q CONNECTING THE EXTENDER AND AN AMPLIFIER
REMOTE AUDIO IN
LR
S-VIDEO
IN
VIDEO
IN
Y Cb / Pb Cr / Pr
COMPONENT
VIDEO IN
LR
L R
AC adaptor
Extender
1.
Connect the AUDIO OUT terminals of the extender with the line input terminals of an amplifi er/
receiver, via the supplied AV cable.
2.
Connect the video input terminal of an amplifi er/receiver/TV to one of the VIDEO OUT terminals
(VIDEO/S-VIDEO/COMPONENT) of the extender, using an appropriate video cable.
The S-VIDEO and component video cables are not supplied with this unit. Use a commercially
available video cable.
Note
NEVER connect different video cables simultaneously, as this may result in disturbed video signals or a failure.
3.
If you wish to remotely control the connected equipment using the Marantz REMOTE CONTROL
terminals, connect the REMOTE terminals of the connected equipment and the extender with
the supplied remote cable.
BASIC OPERATIONS
w
CONNECTING THE BASE UNIT AND EXTENDER WITH IS-LINK
1.
Connect the base unit and extender with two supplied IS-LINK cables.
COMPOSITE
COMPONENT
S-VIDEO
AC adaptor
Extender
Base unit
IS-LINK cables
2.
Connect the supplied AC adaptor to the AC adaptor terminal of the extender.
(For details on preparation of the AC adaptor, see page 8.)
e CONNECTING THE HANDSET TO THE BASE UNIT
For details on connection, see page 9.
r CONNECTING AN iPod TO THE HANDSET
For details on connection, see page 10.