User's Manual

8
Settings
MAP Base unit and Wi-Fi Router pairing
The MAP system needs a Wi-Fi router (wireless network) working together and the router
connected to Internet which is preferred.
For the MAP Base unit pair with the Wi-Fi Router
With the system set up as illustrated in diagram A above, you can start to implement some initial
settings.
(1) Turn on the router.
(2) Connect a USB mouse to the USB port located at rear of the MAP Base unit.
(3) Press and hold the STANDBY button from the MAP Base unit for few seconds then
release the button to turn the unit on. The Power indicator lights on.
(4) The unit will start up. During the start up process, the TV displays an “Android” icon.
(5) After the start up process, the HOME screen displays.
(6) (a) In the case of the MAP Base unit is connected to a HDMI input of a TV set, press the
HDMI button from the remote control to select HDMI as an output source.
(b) In the case of the MAP Base unit is connected to a composite video input of a TV set,
press the COMPOSITE button from the remote control to select Composite video as an
output source.
Note: During the start up process, the unit will not respond to the HDMI or COMPOSITE
button from the remote control. Please wait for around 1 minute or until the HOME
screen displayed then press the HDMI or COMPOSITE button to select the desired
output source, if necessary.
(7) (a) Pair with the router:
(i) At the HOME screen ----- Press the MENU button from the remote control or press the
middle button of the mouse. The menu bar displays at the bottom of the TV screen.
Select the item [Settings] then confirm the selection. The [Settings] screen displays.
(ii) At the [Settings] screen ----- Select item [Wireless & networks] and confirm the
selection. The [wireless & network settings] screen displays.
(iii) At the [wireless & network settings] screen ----- Select item [Wi-Fi settings] and
confirm the selection. The [Wi-Fi settings] screen displays.
(iv) At the [Wi-Fi settings] screen ----- Check the box at the item [Wi-Fi].
A list of Wi-Fi router device name displays. Select the desired router device. A dialog
box with the selected router device name will pop up and prompt for the selected
router’s log-in password.
(v) From the dialog box ----- Select the password entering field. Press the ENTER button
from the remote control or click the Left mouse button, an on screen keyboard will pop up.
Move the mouse cursor to the keyboard and select the password characters.
After entered the password, move the mouse cursor to the [Connect] button and Left
click the mouse button to confirm the router connection with the MAP Base unit. The
[Wi-Fi Settings] screen will display again.
(vi) At the [Wi-Fi Settings] screen ----- Item [Wi-Fi] shows the router name connected.
Also, from the router device list, under the selected router device name, its status will
be changed to “connected” as well.
Press the HOME button from the remote control and jump to Home screen.
(b) If a router had been paired before:
If the MAP Base had been paired with the Wi-Fi Router before, each time to power on the
Base unit, it will search the previously paired router and connect it automatically. User
may proceed to step (8) below.
(8) Now the MAP Base unit is paired with the Wi-Fi router and the system is ready to operate.