User's Manual

4
System Connection
The MAP Smart Media Centre system can implement following function:
(A) It streams photo / music / video files from your Smart Phone through a Wi-Fi (wireless) network.
(B) The MAP Base unit playback photo / music / video files which stored in the USB / SD memory
device.
(C) In tablet mode, you can access Internet through the Wi-Fi (wireless) network.
Before operate the MAP Smart Media Centre, follow the setup that described in below system connection.
The following connections are the MAP system setup, see diagram A, to playback photo / music / video on a
TV set.
Diagram A : MAP System Connection
1. Display Device
Either, (a) For TV set with HDMI input
Connect a HDMI cable to the HDMI input of the TV set and connect the other end of the
cable to the HDMI output located at rear of the MAP Base unit.
Note: If necessary, you may press the HDMI AUDIO ON/OFF button from the remote control to
mute the audio output from the digital TV set.
Or, (b) For TV set (or other display device) with composite video input
Connect the RCA cable to the TV set and connect the other end of the cable (Left / Right
Audio channels and video) to the L / R / V RCA connectors at the rear of the MAP Base
unit.
Note: The MAP Base unit will either output HDMI signal or Composite Video signal one at a time
only (i.e. will not output both at the same time). You can select your desired video output source
from the remote control or from the on screen display (OSD) menu.
2. Keyboard and Mouse
For easy operation of accessing Internet feature, connect a keyboard and a mouse (recommend
using wireless type) to the USB port (USB 2.0) located at rear of the MAP Base unit, see
example in diagram A.
3. Wireless Network
With a Wireless router paired the MAP Base unit and a Smart Phone.