Instructions / Assembly

22
CLEANING & MAINTENANCE
A. Always shut off the gas to the unit while performing service work.
B. Allow the unit to cool before servicing.
C. The unit should be inspected regularly. Excessive debris can build up on this unit from leaves, dirt, or other debris. It is critical
that all control components, burners, and the surrounding area be kept clean and free of all obstructions.
Keep the surrounding area at the base of the unit clean and free of obstructions at all times.
D. The burner assembly must be replaced prior to the unit being put into operation if it is evident that the burner is damaged. Con
tact your local dealer for replacement parts.
E. Periodically perform visual checks of the burner flames. The burner flames should be blue at the base with a combination of
blue/yellow at the body and tips. Contact a qualified service person for maintenance.
CAUTION
HOT DURING OPERATION AND AFTER USE. Children must
be supervised when in the vicinity of this appliance. Serious
injury may occur! Children must be alerted to the hazard of
high surface temperatures and should stay away to avoid
burns or clothing ignition.
Keep entire area ( around bottom) clear for
proper venting
Fig.17-1
PLEASEINSERT BATTERY BEFORE USE
STEP 1
STEP 2
Twist the Cap
STEP 3
Insert AAA Battery , make sure the positive electrode of
the battery is face to you .
Take off the Cap
STEP 4
Tighten the Cap