User's Manual

www.nicerf.com LoRa1276-C1-915
NiceRF Wireless Technology Co., Ltd. Rev 1.1
[e-mail]
- 8 -
9. Mechanical Dimensions（Unit:mm）
10. Order information
a) LoRa1276-C1-915
1) Power supply ripple is too large;
2) The antenna types do not match, or not properly installed;
3) The surrounding environment is harsh, strong interference sources;
4) Surrounding co-channel interference;
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and
users, and
2) This device and its antenna(s) must not be co-located with any other transmitters
except in accordance with FCC multi-transmitter product procedures. Referring to the
multi-transmitter policy, multiple-transmitter(s) and module(s) can be operated
simultaneously without C2P.
3) For all products market in US, OEM has to limit the operation channels for 915MHz
band by supplied firmware programming tool. OEM shall not supply any tool or info to the
end-user regarding to Regulatory Domain change.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least
20cm separation with the antenna while this end product is installed and operated. The
end user has to be informed that the FCC radio-frequency exposure guidelines for an