Product Info
Table Of Contents
- Overview
- The LoRa1262 wireless module uses Semtech's SX1262 device, which uses a high-precision TCXO crystal oscillator, ultra-low receive current and sleep current, and sensitivity of -148dBm. Built-in 64KHz crystal oscillator can wake up the microcontroller ...
- Features
- Applications
- Typical application circuit
- Performance parameters (@Vcc=3.3v ANT connected to 50 ohm load)
- Module performance index
- Pin definition
- Pin comparison table
- Communication antenna
- Mechanical Dimensions(Unit: mm)
- Order information
- FAQ:
www.nicerf.com LoRa1262-915
6. Performance parameters (@Vcc=3.3v ANT connected to 50 ohm load)
Note: Our default shipment is TCXO crystal version, please contact the related sales engineer if
you want to use 10ppm industrial crystal.
(Receive current: <5 mA @passive crystal oscillator)
Parameter Min Typ. Max. Unit Condition
Operation condition
Operating
voltage
range
1.8 3.3 3.7 V
range of
working
temperature
-40 85 ℃
Current consumption
RX current
< 6.5 mA @TCXO
< 5 mA 10ppm crystal
TX current < 130 mA
Sleep current
0.9
uA
OFF mode (SLEEP mode with cold start)
All blocks off
1.3
uA
SLEEP mode (SLEEP mode with warm start)
Configuration retained
1.9
uA
SLEEP mode (SLEEP mode with warm start)
Configuration retained + RC64k
0.56 mA
STDBY_RC mode
RC13M, XOSC OFF
2.35 mA
STDBY_XOSC mode
XOSC ON
RF parameter
Frequency range
902.8 915 927.3 MHZ @915MHZ
NiceRF Wireless Technology Co., Ltd. Rev 1.1
sales@nicerf.com
- 4 -