User Manual

14
*The device supports data storage devices with a maximum capacity of 32 GB and MP3
audio format.
PHONE CALLS
To answer and afterwards end a phone call, press button (3). Long-press the same button to
reject an incoming call. Press the button twice to redial the last number called.
LIGHTING MODES
Pressing button (3) switches between individual colour modes. Long-pressing the button turns
the light o, short-pressing turns it back on.
Note: Power consumption increases when a lighting mode is active.
TRUE WIRELESS (TWS) CONNECTION
True Wireless (TWS) technology enables you to connect two Niceboy RAZE Neon speakers
and play music simultaneously in stereo.
1. Turn both Niceboy RAZE Neon speakers on and make sure they are not connected
to any Bluetooth device (mobile, notebook etc.).
2. Short-press button (3) on one of the speakers. A tone will indicate a successful
interconnection of the speakers.
3. You can now open Bluetooth settings on your device. Select “Niceboy RAZE Neon”
in the list of available devices. A tone will indicate a successful pairing..
FACTORY SETTINGS
In case of technical problems, reset the speaker to factory settings. The speaker must be tur-
ned on. Press and hold button (5) for 8 seconds. The speaker will turn o then back on again.
The reset is now complete.