User Manual

17
FIRST START-UP AND PAIRING
1. Remove both earphones from the charging box and remove the stickers protecting
the earphones‘ charging pins (3).
2. Switch the earphones on by pressing and holding the multifunction button (2) on
both earphones.
3. The earphones will switch on and pair with each other. Once the LED (1) starts to
alternate between ashing blue and red, the earphones are ready for connection to
Bluetooth.
4. Open Bluetooth settings on your device and search for „Niceboy HIVE Podsie 3“ in
the list of available devices.
5. Successful pairing is indicated by a sound. The LED (1) will switch o.
To reconnect to a device that has already been paired, simply remove the earpho-
nes from the box.
They will switch on and connect to the device automatically.
SWITCHING ON AND OFF
To switch the earphones on, simply remove them from the charging box, or manually
switch them on by pressing and holding both multifunction buttons (2). To switch them
o, simply place the earphones in the charging box. They will automatically turn o
and disconnect from your device. The earphones are placed in the box correctly when
the LED (1) turns red. When the earphones are fully charged, the LED goes out.
To switch the earphones o, press and hold both multifunction buttons (2) for approx.
10 seconds.