User Manual

15
INITIAL START UP AND PAIRING
1. Take both headphones out of the charging box and take o the labels
protecting the charging pins (3) on the headphones.
2. Power on the headphones with one long press of the multifunctional button
(3) on both headphones.
3. After the LED diode (2) begins to ash both green and red, the headphones
are prepared to connect to a Bluetooth device.
4. Open the Bluetooth settings on your own device and search for
“Niceboy HIVE pods 2” on the list of available devices.
5. Once the pairing is successful it will be announced by an audible queue and
the LED diode (2) will ash green for a long interval.
Just take the headphones out of the box to connect them again to a previously
connected device. The headphones will automatically power on and connect
to the device.
POWERING ON AND OFF:
Just take the headphones out of the charging box to power them on or ma-
nually power on the headphones with one long press of both multifunctional
buttons.
To power the headphones o, just place them back in their charging box. They
will power o themselves and disconnect from your device. The diode (2) will
shine red once the headphones have been correctly stored in their box. If the
headphones are 100% charged, the diode will stop shining. The headphones
can also be powered o with one long press of both multifunctional buttons
lasting about 6 seconds.