User Manual
23
FACTORY RESET:
In case of technical issues, reset the earphones to factory
settings.
1. Insert both earpieces into the charging box, remove them
from the list of paired devices, and turn Bluetooth o.
2. Remove both headphones from the charging box.
3. Press the multifunction button ve times in succession (2) on
both earphones. An acoustic prompt indicates a successful
reset, and the earphones will switch o.
4. Place both earphones back in the charging box.
5. After removing both earpieces from the charging box, they
will switch on automatically and pair with each other. The
reset process is now complete.
SPECIFICATIONS
BT: 5.3
Frequency band: 2.4GHz
Radiofrequency power: ≤2.5mW
BT proles: HFP, A2DP, AVRCP
Supported codecs: AAC, SBC
Degree of protection: IPX4
Transmission range: 10m
Speaker: 10mm
Frequency: 20Hz-20kHz