Installation Instructions

ENGLISH – 7
TECHNICAL SPECIFICATIONS
7
7 TECHNICAL SPECIFICATIONS
l
All technical specications stated in this section re-
fer to an ambient temperature of 20°C (± 5°C). Nice
S.p.A. reserves the right to apply modications to the
product at any time when deemed necessary, without
altering its functions and intended use.
l
The range of transmitters and the reception capacity
of the receivers are heavily affected by other devic-
es (alarms, headphones, etc.) operating on the same
frequency in your area. Under such conditions, Nice
S.p.A. cannot provide any guarantee with regard to the
actual range of its devices.
Table 1
TECHNICAL SPECIFICATIONS
Description Technical specication
MYGO (MYGO/A)
Product type One-way transmitter
Power supply 3 Vdc lithium battery type CR2430
Battery life
approx. 3 years, with 10 command
transmissions per day
Frequency 433.92 MHz
Radiated power (ERP) < 10 mW
Radio encoding
O-Code, O-Code/A
ET Blue, Peccinin and Linear
Operating temperature -5°C ... +55 °C
Protection rating
IP 40 (suitable for use at home indoors
or in outdoor areas under cover)
Dimensions 72 x 34 x 110h mm
Weight 20 g
CONFORMITY
8
8 CONFORMITY
8.1 SIMPLIFIED EU DECLARATION OF
CONFORMITY
The manufacturer, Nice S.p.A., declares that the product MYGO4 -
MYGO8 is compliant with the directive 2014/53/UE.
The full text of the EU declaration of conformity is available at the fol
-
lowing internet address: https://www.niceforyou.com/en/support.
8.2 COMPLIANCE WITH THE FCC RULES (PART 15)
AND WITH RSS-210 RULES
This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development Cana
-
da’s licence-exempt RSS(s); and with Part 15 of the FCC rules of the
United States of America. Operation is subject to the following two
conditions: (1) This device may not cause interference. (2) This device
must accept any interference, including interference that may cause
undesired operation of the device. Any changes or modications made
to this device, without the express permission of the manufacturer,
may void the user’s authority to operate this device.
ACCESSORIES
9
9 ACCESSORIES
9.1 STRING FOR KEYRING
The string (A), supplied as an accessory with the transmitter, is useful
for fastening the transmitter itself to a keyring or other similar object.
To fasten it, wrap the string around slot (B) present on the transmitter.
A
B
12
9.2 FASTENING SUPPORT
The support (A), which can be ordered separately as an accessory,
can be used for fastening the transmitter to various objects such as,
for example, sun shades for cars. To mount the support (A) to the
transmitter, simply insert it into slot (B) until the tab (C) clicks. To re
-
move it, insert a screwdriver or other similar tool into hole (D) and
leverage on the tab (C); then remove it.
A
B
D
C
13