User's Manual

FAST FLASHING 1/4 second
When it turns on it means there is a
BM60 memory card; it then indicates
that the code number received is a
“copy” while only “original” codes are
valid.
When it turns on it means there are
code numbers memorised that do not
belong to the Flor version; it then
indicates that the code number is not
in the code number window and re-
synchronisation is stopped
.
When it turns on it means that an
error was found in the memory during
reading; it then indicates that the code
is not in the code number window and
re-synchronisation is impossible.
When it turns on it means there is a
BM1000 memory card; it then
indicates that the code is not in the
code number window but that it has
been re-synchronised.
When it turns on it means there is a
BM250 memory card
.
1
2
3
4
5
SLOW FLASHING 1/2 second
No. flashes DESCRIPTION No. flashes DESCRIPTION
The code number received is not
among those authorised
.
End of learning time without any
result
.
Learning successfully finished
(authorised code number)
.
The code number is already on the
authorised code list
.
The list is empty (no codes) .
The list is full (there is no room for
other code numbers)
.
A request has been made to delete a
code number that does not exist
.
Different code numbers were
received during the learning phase
.
Password entered .
1
2*
3
4
5
6
7
8
9
* If the 2nd type of disabling function is active, the 2nd flash will be longer than the first
If the 2nd type of disabling function is not active, both flashes will be the same
