Datasheet

Construction manual for robot kit NIBObee 01.12.2014
3.8 Charging the rechargeable batteries by USB
The rechargeable batteries of the NIBObee can be charged as follows:
1. The robot is switched off and
2. It is connected over USB with the computer and
3. The position of the jumpers JP1, JP2 and JP3 is changed into „the
front position” (see photos):
Normal operation:
Charging mode:
The green LED5 (shown on the photos) indicates the state of charge:
LED5 meaning
off no charging
on, with quick interrupts charging
flashes every 2 seconds finished charging
flashes 2 times a second error
½ second on ½ second off no rechargeable batteries / jumper
position error
The charging mode terminates automatically after 7 hours.
http://nibobee.nicai-systems.de 57