Datasheet

Construction manual for robot kit NIBObee 01.12.2014
As soon as the motor fits correctly the board  is soldered to the main circuit
board beginning with the middle soldering contact (see pictures).
The mechanical soldering joints work with the help of capillary action: you tin
the respective point sparse with tin-solder and heat the point afterwards
about 10 seconds with the soldering iron. Because of the capillary action the
tin-solder will be pulled inwards and the boards will be fixed together.
Tip: While soldering the transmission unit you have to pay attention that the
several circuit boards are orthogonal adjusted. It is not easy to disassemble
the unit afterwards.
The result should look like this:
http://nibobee.nicai-systems.de 36