Datasheet

Construction manual for robot kit NIBObee 01.12.2014
Now the both white double gearwheels have to be pressed onto the two long
steel axes (3x37 mm). Therefore you have to press the axis with the help of a
small hammer into the side of the gearwheel with the smaller gear.
Then you have to press the axis carefully with the small hammer through the
gear.
The distance from the smaller gear to the end of the axis should be 17 mm:
With the help of the stencil inside the package, you can easily proof the
distances:
http://nibobee.nicai-systems.de 34
17 mm