Datasheet

Construction manual for robot kit NIBObee 01.12.2014
According to this the battery packs of the type B are put on the board with the
soldering contacts (outside contact plates) pointing to the edge of the board:
The soldering contacts of the battery packs of type A must point to the
middle of the main circuit board.
Before soldering the battery packs must be fixed with the small cable straps
at the circuit board. The cable strap has to put through the two holes of the
board:
Then the cable strap is to be fastened:
The cable strap has to be cut shortly with an electronic cutting pliers.
The other battery pack has to be fixed the same way.
http://nibobee.nicai-systems.de 30