Datasheet

Construction manual for robot kit NIBObee 01.12.2014
2.3.19 USB socket
During installation of the USB socket X6
you should pay attention to the fact that
the smaller pins are not bent. The part is
polarity safe. The USB socket is soldered
at large at 6 soldering pads.
2.3.20 Battery packs
Now the two battery packs will be attached to the main circuit board. First of
all they must be fixed each with one small cable strap.
Depending upon the supplier the battery packs are different and must be
assembled differently:
Before assembling the packs you have to pay attention to the “+/-” labels
on the circuit board and to the “+/-” labels of the respective battery pack (the
important side is the side with the soldering contacts: the outside contact
plates).
The “+/-” labels of the board and of the pack only has to suit at the side with
the soldering contacts.
http://nibobee.nicai-systems.de 29
type part
USB
socket
X6
Type A
Type B
Type A
Type B