Datasheet

Construction manual for robot kit NIBObee 01.12.2014

The following resistors must be placed onto the secondary circuit boards:

R32 is to place on the bottom side of board , R33 is to place on the

bottom side of board :

R30 is to find on board , R31 is to find on board :

Hint: The resistors and the capacitors on the boards  and  have to be soldered

plain onto the boards, so that they don't interfere with the driving unit in the end!

R34, R36, R37 and R38 have to be placed on board :

http://nibobee.nicai-systems.de 21

R32 – 180 Ω

code: brown-grey-brown

R33 – 180 Ω

code: brown-grey-brown

R30 – 820 Ω

code: grey-red-brown

R34 – 2,2 kΩ

code: red-red-red

R37 – 2,2 kΩ

code: red-red-red

R31 – 820 Ω

code: grey-red-brown

R36 – 120 Ω

code: brown-red-brown

R38 – 2,2 kΩ

code: red-red-red