Datasheet

Construction manual for robot kit NIBObee 01.12.2014
2.2 Soldering
For soldering you should use a regulated soldering station with at least
50 W and a fine tip.
Hint: The manual of the soldering station should definitely contain the word
“regulated”. A regulated soldering station means, that it “knows” exactly the
temperature of its tip. So it is able to readjust the temperature if its necessary.
It is very helpful to have no temperature drop during soldering!
You should select a temperature of about 370 °C, depending on the soldering
station the temperature can drift up to 400 °C. The best thing is to test it. You
should use flux cored solder wire with a diameter of 0.5 mm. The best for
beginners is to start with lead-containing solder wire (SN60PB40).
http://nibobee.nicai-systems.de 12