Datasheet

Construction manual for robot kit NIBObee 01.12.2014
1.6 Other hardware components
1.6.1 Status LEDs
The two yellow LEDs (LED0 and LED3) and the two red LEDs (LED1 and
LED2) show the actual status of the robot. They can be controlled by own
programming.
1.6.2 Function LEDs
The green LEDs (LED4 - LED6) show the following functions:
LED4
Programming: flashes during the programming process
LED5
Charging information: flashes during the charging process
LED6
Operating mode information: flashes during the NIBObee is
online
1.6.3 Voltage switch / Charging
The voltage switch S1 separates the battery voltage from the circuit and
provides the possibility to charge the rechargeable batteries in combination
with the jumpers JP1, JP2 and JP3 (see chapter 3.8).
Normal operation:
http://nibobee.nicai-systems.de 10