Datasheet

Construction manual - Robot kit NIBO burger 08.09.2015
3 Preparation for operation
After finishing the preparations the NIBO burger can now be activated step by
step for the first time.
!! Important !!
The NIBO burger must never be switched on without inserted IC2
(74HC139), otherwise the transistors for the motor-control will be
destroyed!
1. Switch off the robot
2. Remove all sensor bricks
3. Take off the motor jumper J6
4. Insert 4 x Micro AAA 1,2V rechargeable batteries
Now the NIBO burger has to be switched on, then the white LED 5 near to
the switch must flash.
3.1 Part I – Coding-LEDs & buttons
About 5 seconds after switching on the leds LED 1 – LED 4 should flash one
after another for a short time.
Now press button 1, then LED 1 must glow.
If button 2 is pressed, LED 2 has to glow.
While button 3 is pressed, LED 3 must glow.
All coding leds and buttons are now checked and we switch off the
NIBO burger.
http://nibo.nicai-systems.de 79