Datasheet

Construction manual - Robot kit NIBO burger 08.09.2015
2.5.5 Insertion of the ICs
The robot must never be switched on without inserted IC2 (74HC139),
otherwise the transistors for the motor-control will be destroyed!
The four ICs must be put with careful pressure into the sockets.
The notches on the ICs have to point in the
same direction as the marks on the board!!
IC1: ATmega16
IC2: 74HC139
IC4: LM358
IC5: ATtiny44
ICs are sensitive to electrostatic damage!
Electrostatic sensitivity means that these electronic parts can be destroyed
only by being touched by an electrically charged person. A person can get
electrically charged e.g. by wearing clothes of fleece material, or by walking
on a carpet. By touching grounded metal the person can easily get
discharged.
http://nibo.nicai-systems.de 76