Datasheet

Construction manual - Robot kit NIBO burger 08.09.2015
Put the white standard (3 mm) plastic distance ring to the short axis with the
red gearwheel (to the opposite side of the little gearwheel). Then the axis
must be put (with the distance ring ahead) into the borehole A.
Afterwards you have to put the short axis with the white gearwheel (the little
gearwheel outwards) into the borehole C:
Then the long axis with the white gearwheel (the little gearwheel outwards)
must be put into the lowermost borehole:
You have to put a slim (2 mm) distance ring to this axis:
http://nibo.nicai-systems.de 71